Unknown
Procedure A — Liquid (7 steps)Found a stain but you have no idea what it is or how long it’s been there? Don’t worry — try these cleaning steps to get rid of the mystery mess.
Procedure A — Liquid (7 steps)
- Scrape or blot up any excess.
- Apply detergent solution (see Cleaning Solutions) with a damp towel and let it sit for 3–5 minutes.
- Blot — don’t rub.
- Apply undiluted white vinegar with a damp towel.
- Blot — don’t rub.
- Apply water with a damp sponge.
- Blot again. Finish by weighting down a half-inch-thick pad of white paper towels over the spot to draw out remaining moisture. Leave overnight if needed.
Or try — Procedure C — Grease / Solvent (6 steps)
- Apply dry-cleaning solvent (see Cleaning Solutions) with a damp towel.
- Blot — don’t rub.
- Reapply the solvent the same way.
- Blot — don’t rub.
- Apply water with a damp towel.
- Blot again, then weight down a half-inch-thick pad of white paper towels to pull out remaining moisture. Leave overnight if needed.
Important:Not every carpet fiber responds the same way to stain treatments. Before trying any of the methods above, check with your fiber manufacturer for their recommended care guidelines — skipping this step could void your warranty. For more information, contact your local First Floors store.